New Cyclization Route to the Skeletons of Lennoxamine and Chilenine

A new cyclization route, triggered by epoxide opening, has been performed to provide the key intermediates for isoindolobenzapine alkaloids, lennoxamine and chilenine. The epoxide was prepared by the Stille reaction using vinyltributylstannane and the following dioxirane treatment. Cyclization under the treatment of BF₃ · OEt₂ provided an azepine moiety, and the oxidative cyclization toward the known precursor for the alkaloids has been achieved by reaction with a stoichiometric amount of Pd(OAc)₂. This formal synthesis suggests a new route to the alkaloids.     

Oxidative Coupling Reaction of N,N‐Dialkylanilines with Cerium(IV) Ammonium Nitrate in the Solid State

Oxidative coupling reactions of N,N‐dialkylanilines with cerium(IV) ammonium nitrate can be achieved by grinding at room temperature in the absence of solvents.     

One-Pot Sequential Approach for the Construction of Highly Functionalized Triazolo[4,3-c]pyrimidine Library

Novel [1,2,4]triazolo[4,3-c]pyrimidine-8-carboxamides were synthesized via oxidative cyclization of hydrazono-1,6-dihydropyrimidine-5-carboxamide intermediates by the application of iodobenzenediacetate as a sole cyclizing agent. Here, we report a one-pot sequential strategy to generate the corresponding triazolopyrimidines by condensation of preprepared α-acylketene dithioacetals and arylamidines. Moreover, this process describes the application of presynthesized arylamidines, which omits the Suzuki–Miyaura cross-coupling reaction and hence provides metal-free organic synthesis in an atom- and step-economical fashion.     

Microstructural evolution during oxidative ablation in air for polyacrylonitrile based carbon fibers with different graphite degrees

Polyacrylonitrile‐based carbon fibers with different graphite degrees were oxidative ablated at 500 and 600 °C in air. By Thermal gravimetric (TG), Raman spectroscopy, X‐ray diffraction, and SEM, the mass loss, microstructure, and surface morphology of carbon fibers were investigated. The mass loss of carbon fiber increases linearly with increasing oxidative ablated time under 500 and 600 °C. The carbon fiber with higher graphite degree shows higher oxidative resistance, and the surface roughness increases gradually because of chemical ablation during the whole oxidation. A gloss morphology appears on the surface primarily because of physical denudation for carbon fibers with lower graphite degree and then burn off according to carbon and oxygen reaction. The crystallite size (La) decreases significantly, while interlayer spacing(d₀₀₂) remains nearly unchanged. SEM observation suggests the two kinds of ablation mechanisms for carbon fibers with different graphite degrees indicating that CC band in sp³ hybridization prefers to be attacked by oxygen molecule more than that in sp² hybridization during oxidation ablation in air. Copyright © 2012 John Wiley & Sons, Ltd.     

Microbial desulfurization of waste latex rubber with Alicyclobacillus sp.

A microbe with desulfurizing capability, Alicyclobacillus sp., was selected to recycle waste latex rubber (WLR). The growth characteristics of the microorganism and the technical conditions in the co-culture desulfurization process were studied. The desulfurization effect of Alicyclobacillus sp. on the WLR was characterized, and the mechanism for the microbial desulfurization of WLR was tentatively explored. The results showed that adding 5% (w/v) WLR into medium had little effect on the growth of Alicyclobacillus sp. The surfactant polysorbate 80 (Tween 80) had a toxic effect on Alicyclobacillus sp., but the growth of the microbe was vigorous if the proper technique was used: the mixing of WLR with Tween 80, followed by the addition of the mixture into the culture media. With the increase of desulfurization time, the swelling value of desulfurizated waste latex rubber (DWLR) increased, but the crosslink density decreased. After co-culture desulfurization for 8–10 days, a DWLR with good desulfurization effect was obtained. The mechanical properties of natural rubber (NR)/DWLR composite improved significantly over those of NR/WLR composite. XPS and FTIR results revealed that Alicyclobacillus sp. could break the crosslinked sulfur bonds and oxidize them to sulfones groups. The increase of O element content on the surface of DWLR was confirmed by water contact angle measurements. The relationship between the crosslink density and sol fraction of DWLR with different desulfurization times agreed with the Horikx equation, an indication that the microorganisms could break the crosslinked sulfur bonds on the surface of WLR, but leaving the main chains intact.     

Thermal oxidative degradation of additive-free polypropylene pellets investigated by multichannel Fourier-transform chemiluminescence spectroscopy

Thermal oxidative degradation of additive-free polypropylene pellets heated isothermally in dry air at 150 and 180 °C (below and above the melting point of 163 °C) was investigated by multichannel Fourier-transform chemiluminescence spectroscopy. The initial peak wavelength of chemiluminescence emission at 490 nm remained constant during the early stages of thermal degradation, but new emissions developed with time in the red spectral region over an extended oxidation period. The time-dependent luminescence spectra were deconvoluted into three emission bands by least-squares fitting using Gaussian curves. We concluded that at least three groups of luminescent species (luminophores), having different conjugation lengths, were generated by thermal oxidation over extended periods and show luminescence around 490, 660, and 740 nm.     

改性Y型分子筛对FCC汽油脱硫性能的研究

采用液相离子交换法制备了Cu(I)Y、NiY、CeY分子筛,利用XRD、ICP/MS、N₂吸附脱附等技术对其物化性质进行了表征,使用固定床技术和色谱-硫化学发光检测(SCD)偶联技术系统考查了改性Y分子筛对FCC汽油的选择性吸附脱硫性能,着重探讨了FCC汽油选择性吸附脱硫过程中硫化物的脱除规律。结果表明,不同金属阳离子改性的Y分子筛对FCC汽油中不同硫化物选择性有所不同,对CeY分子筛:2-甲基-5-乙基噻吩<噻吩3硫醇< C₂噻吩<2或3-甲基噻吩<苯并噻吩<3,4-二甲基噻吩≈2,3,4-三甲基噻吩<四氢噻吩,而NiY与Cu(I)Y选择性相同:C₃硫醇<2-甲基-5-乙基噻吩2噻吩<2或3-甲基噻吩<噻吩<苯并噻吩<3,4-二甲基噻吩≈2,3,4-三甲基噻吩<四氢噻吩,改性Y分子筛对噻吩及小分子烷基取代噻吩类硫化物的选择性较差。     

Investigation and Comparison of the Mechanistic Steps in the [(Cp*MCl2)2] (Cp*=C5Me5; M=Rh,Ir)‐Catalyzed Oxidative Annulation of Isoquinolones with Alkynes

The mechanism of the [(Cp*MCl₂)₂] (M=Rh, Ir)‐catalyzed oxidative annulation reaction of isoquinolones with alkynes was investigated in detail. In the first acetate‐assisted C? H‐activation process (cyclometalated step) and the subsequent mono‐alkyne insertion into the M? C bonds of the cyclometalated compounds, both Rh and Ir complexes participated well. However, the desired final products, dibenzo[a,g]quinolizin‐8‐one derivatives, were only formed in high yield when the Rh species participated in the final oxidative coupling of the C? N bond. Moreover, a Rh^I sandwich intermediate was isolated during this transformation. The iridium complexes were found to be inactive in the oxidative coupling processes. All of the relevant intermediates were fully characterized and determined by single‐crystal X‐ray diffraction analysis. Based on this mechanistic study, a Rh^III→Rh^I→Rh^III catalytic cycle was proposed for this reaction.     

两个带呋喃悬臂不对称大环双核铜配合物的合成、结构及性质

合成并表征了2个不对称大环双核铜配合物[Cu₂（L¹）Cl₂]·CH₃CN（1）和[Cu₂（L²）Br₂]·CH₃CN·H₂O（2）。配合物与CT-DNA的作用通过紫外-可见光谱,粘度实验,圆二色谱和凝胶电泳实验进行了研究。紫外-可见光谱的结果表明配合物与DNA的结合常数分别为6.2×10⁵和7.2×10⁵,圆二色谱的实验表明配合物能与DNA较好的结合,粘度实验表明配合物与DNA的结合为非典型的插入模式,凝胶电泳实验显示配合物通过氧化机理对DNA有较强的切割活性。     

Development of aqueous oxidative Ugi-type reactions by copper-catalyzed surfactant-promoted C(sp)–H direct functionalization in water

Direct assembly of α-amino amides from N-alkyl amines and isocyanides through oxidative Ugi-type reactions in aqueous conditions, has been achieved in a Cu(I)–TBHP–surfactant catalysis system. Various N-alkyl amines and isocyanides could be tolerated in this reaction and furnish α-amino amides in moderate yields.